हिन्दी में विज्ञापन ((Vigyapan Lekhan - Advertisement)

For study purpose only - for children

हिन्दी में विज्ञापन ((Vigyapan Lekhan - Advertisement):

1. अपना मकान का ऊपरी हिस्सा किराये पर (upper portion of house for rent)
'मकान का ऊपरी हिस्सा किराये पर है। साफ, सुथरी, बढ़िया शांत बस्ती में। 3 बैडरूम, 2 बाथरूम, ड्राइंग, डायनिंग, हवादार किचन, स्टडी, बड़ा बरामदा, गैराज। मकान के सामने हरा-भरा पार्क है। डी.पी.एस स्कूल दोहा से १० मिनट की दूरी परसंपर्क करें : फोन नं. ९९८०८०९०९०'

2. शीतल पेय का विज्ञापन (cold drinks)
नीबू का पानी
नीबू का रस 1 भाग, शकर 4-6 भाग लेकर दोनों को पकाकर चाशनी बनने पर आवश्यकतानुसार अल्प मात्रा में लौंग एवं कालीमिर्च का चूर्ण डालें, आवश्यकतानुसार पानी मिलाकर पीने से यह ग्रीष्म ऋतु में भोजन के प्रति रुचि उत्पन्न करता है, भोजन को पचाता है एवं गर्मी में वात बढ़ने से वात को नष्ट करता है।
OR
गुलाब शर्बत
गुलाब जल में दुगुनी शकर मिलाकर चाशनी बनाकर छान लें, 10-40 एमएल मात्रा तक पानी मिलाकर सेवन करने से शरीर में जलन, अधिक प्यास को नष्ट करता है, शरीर शीतल होता है।

3. डिब्बाबंद खाने की कंपनी के लिए विज्ञापन (canned/ closed container foods)

उत्पाद/सेवा (हम बेच):
डिब्बाबंद मशरूम, डिब्बा बंद भोजन, डिब्बाबंद मशरूम, डिब्बाबंद टमाटर का पेस्ट, सेब का रस ध्यान, डिब्बाबंद फल, डिब्बाबंद मछली, डिब्बाबंद मीठी मकई
देश/क्षेत्र: चीन (महाद्वीप)
व्यवसाय प्रकार: निर्माता, व्यापारिक कंपनी

4. चिप्स बनाने वाली कंपनी को कुशल कारीगरों की आवश्यकता है (experienced manpower required for chips making company)

आलू चिप्स कंपनी मास्टर आवश्यकता है
वेतन ४००० - ६०००
कंपनी - हल्दीराम चिप्स

Quick Activation of Server 2016 via Command Line

Having problems activating Windows Server 2016, (or previous versions Windows 8, or Server 2012) one of these three solutions below should get you through:

1.    Command Line to launch activation GUI:

This is handy if the GUI won’t start and you want to skip some steps to get it to work.

1. Click START – type RUN
2. Type slui 3 and press ENTER
   1. yes, SLUI: which stands for SOFTWARE LICENSING USER INTERFACE
      1. SLUI 1 brings up the activation status window
      2. SLUI 2 brings up the activation window
      3. SLUI 3 brings up the CHANGE PRODUCT KEY window
      4. SLUI 4 brings up the CALL MICROSOFT & MANUALLY ACTIVATE window
3. Type in your product key

     2.     To Activate Windows via Command Line:

   

 1.  Launch a CMD as an Administrator

 2.   Type: slmgr.vbs /ipk xxxxx-xxxxx-xxxxx-xxxxx-xxxxx

 3.   Press Enter

If your key is valid and you are connected to the internet, it should activate within a second or two.

 3.     If above steps points failure, then call Microsoft Activation Center; direct support line at 1 800-936-4900

 

Granting Calendar Access via Exchange Control Panel (ECP)

Ex: Add-MailboxFolderPermission -identity "Managingdirector:\Calendar" -user "personalassistant" -AccessRights Reviewer

 

To change permissions on a Calendar item, type the following command:

 

This command will grant Calendar access, with level reviewer to his Personal Assitant. You can use Editor instead of Reviewer for more access.

 

If Managing director had PA in the past, you may want to remove that access. To that you can use the following command:

 

Ex: Remove-MailboxFolderPermission -identity "ManagingDirector:\Calendar" -user "oldPA"

Desktop Wallpaper Group Policy doesn't work for Win 10 clients: workaround

 

Windows 10 does funky things with wallpapers. It likes to make a cached copy in  %appdata%\roaming\microsoft\windows\themes\cachedfiles

and it will sometimes make a copy under  %AppData%\roaming\Microsoft\Windows\Themes\TranscodedWallpaper.jpg as well.

 

There is different behavior on Windows 7 and Windows 10 on desktop wallpaper. In Windows 7, when we log into the system, the cached wallpaper file will re-generated automatically.

But in Windows 10, if the wallpaper path didn’t change, the cached wallpaper will not re-generate.

After I deleted below file and log off/log on I can see the desktop wallpaper automatically changed on Windows 10.

 

%USERPROFILE%\AppData\Roaming\Microsoft\Windows\Themes\TranscodedWallpaper

So I applied this deletion operation to the domain controller as a log off  script, the script which is as below.

I created a .bat file and the content is:

del %USERPROFILE%\AppData\Roaming\Microsoft\Windows\Themes\TranscodedWallpaper

 

Replication to all domains

Replicate to all domains via command prompt:

repadmin /syncall /AePD

Quickly replicate to Azure AD via Azure ADConnect using PowerShell from Azure AD Connect server (if you have hybrid mode)

Start-ADSyncSyncCycle

  

via Replmon GUI:

 

 

 

 

 

 

System Drive running out of disk space due to installer folder

Symptom: 

Environment :

Server 2012 R2.

Test Environment for application

Problem :

almost out of disk space (C Drive). Out of 60 GB only 3GB is left. This occurs after routine Microsoft patching cycle completes. After checking the folder size we noticed that Windows Installer hidden folder utilizes over 22GB of files and WinSxS utilizes over 8GB of files. Is it advised to move 'Installer' folder to another shared location and then create a shortcut to run "mklink /D C:\Windows\Installer D:\C_DRIVE\Windows\Installer" or is there any other alternative method we need to consider to clean up the disk space.

you need to resolve this issue

Cause: 

Normal behavior

Resolution:

Creating link path into installer folder is last option 

Note : Not recommended, nor supported deleting files from this directory.

Windows Installer Cache, located in c:\windows\installer folder, is used to store important files for applications installed using the Windows Installer technology and should not be deleted. If the installer cache has been compromised, you may not immediately see problems until you perform an action such as uninstall, repair, or update on a product.

More information : 

https://support.microsoft.com/en-us/help/2667628/missing-windows-installer-cache-files-will-require-a-computer-rebuild

Windows/installer folder may contain Orphaned Patches, but the tricky job how to identify the registered or not patch.

During the research I have found a script might help us, please check :

https://blogs.msdn.microsoft.com/heaths/2007/02/01/how-to-safely-delete-orphaned-patches/

From another side please apply this update on the system and reboot “update MSI.DLL :

https://support.microsoft.com/en-us/help/3139923/windows-installer-msi-repair-doesn-t-work-when-msi-package-is-installed-on-an-http-share-in-windows”

Additionally, thought to share this with you if applicable. The value of the MaxPatchCacheSize under HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\Installer policy is the maximum percentage of disk space that the installer can use for the cache of old files

More information :

https://msdn.microsoft.com/en-us/library/windows/desktop/aa369798(v=vs.85).aspx 

and 

https://msdn.microsoft.com/en-us/library/windows/desktop/aa369784(v=vs.85).aspx

There is no limitation as to how many files that we could store in the windows folders. The content in the folder c:\windows\Installer are added by the msi based installations. When they are planning to install so many applications that would lay down 7000 files, they would want to consider the space and the other performance issues as well

Therefore last efforts if above did not resolve the issue :

 1. Increase C: volume size ( if possible) (recommended action).

 2.  Workaround : (prefer to apply on test environment within the installed application).

Copy using Windows explorer C:\Windows\Installer to another disk, e.g., D:\C_DRIVE\Windows\Installer

Make a backup copy of C:\Windows\Installer

Type the following commands in a cmd.exe window running as Administrator:

rmdir /s /q C:\Windows\Installer

mklink /D C:\Windows\Installer D:\C_DRIVE\Windows\Installer

Force Active Directory replication on a domain controller

Force Active Directory replication on a domain controller

In order to force Active Directory replication, issue the command 'repadmin /syncall /AeD' on the domain controller.  Run this command on the domain controller in which you wish to update the Active Directory database for.  For example if DC2 is out of Sync, run the command on DC2.

A = All Partitions

e = Enterprise (Cross Site)

D = Identify servers by distinguished name in messages.

By default this does a pull replication - which is how AD works by default.  If you want to do a push replication use the following command:

repadmin /syncall /APeD

P = Push

You want to do a push replication if you make changes on a DC and you want to replicate those changes to all other DC's.  For example, you make a change on DC1 and you want all other changes to get that change instantly, run repadmin /syncall /APeD on DC1.

Active Directory Replication Monitor (replmon) tool can be also used to sync across all domains

- synchronize each directory partition with all servers >> push mode and cross site boundaries.

note: gpupdate /force updates the group policies